No drawings found.
* Last version maybe changed.

Service Equipment And Supplies Assembly 346-5804 Plate & Film GP(Caterpillar 994H wheel loader)

Part NO. 346-5804
Name Plate & Film GP
Section Service Equipment And Supplies
Modifier -MACHINE
SNP DWC IESCN SEBP57391372
Updated 2018-09-12
Stock China GuangZhou
Accept Payment T/T, Western Union, Alipay, Paypal, L/C
Shipping Method Sea, Air or DHL/FEDEX/TNT/EMS

Power-Cat.COM have excellent quality Guarantee.

CAT 994H Service Equipment And Supplies 346-5804 Assembly

346-5804 Plate & Film GP -MACHINE , S/N DWC1-UP, Part OF 346-5825 Configuration AR
Model: Caterpillar 994H
Catalog: Wheel Loader
Section: Service Equipment And Supplies

Grp. Ref. Part NO. Name Modify Note Comments Quantity Maint
3E-8102 3E-8102 FILM-IDENTIFICATION STEERING Oil FILTER 3 N
252-8083 252-8083 FILM-IDENTIFICATION LUBRICATION POINTS, REAR, RH 1 N
252-8084 252-8084 FILM-IDENTIFICATION LUBRICATION POINTS, REAR, LH 1 N
253-3558 253-3558 FILM-IDENTIFICATION DRIVE Shaft LUBRICATION 1 N
368-4187 368-4187 FILM-IDENTIFICATION LUBRICATION POINTS, FRONT, RH 1 N
368-4188 368-4188 FILM-IDENTIFICATION LUBRICATION POINTS, FRONT, LH 1 N
368-4189 368-4189 FILM-IDENTIFICATION LUBRICATION POINTS, FRONT 1 N
368-4190 368-4190 FILM-IDENTIFICATION LUBRICATION POINTS, FRONT 1 N
7X-3229 7X-3229 FILM-IDENTIFICATION LIFT EYE, TIE-DOWN LOCATION 2 N
358-6729 358-6729 FILM-WARNING DOWNGRADE HAULING, Read OMM 1 N
260-7653 260-7653 FILM-WARNING PRODUCT Link 300, INTL 1 N
228-2616 228-2616 FILM-WARNING UNIVERSAL, Read OMM 1 N
225-4257 225-4257 FILM-WARNING HOT Fluid Under PRESS 2 N
222-7944 222-7944 FILM-WARNING DO Not OPERATE, Read OMM, INTL 2 N
236-7227 236-7227 FILM-WARNING PARKING BRAKE, INTERNATIONAL 1 N
226-1274 226-1274 FILM-WARNING CRUSH HAZARD, Read OMM, INTL 1 N
226-1240 226-1240 FILM-WARNING CRUSH HAZARD, Stay BACK, INTL 2 N
236-7230 236-7230 TAG-WARNING STEERING Frame LOCK 1 N
S: DWC / DWC (1 ~ 99999)
: (1 - ON Side OF Steering Filter Near Front OF Firewall Near Centerline OF MACHINE) : (1 - ON Top OF Steering Case Drain Filter Mounting Bracket Near Front OF Firewall Near Centerline OF MACHINE) : (2 - ON Each Steering Circuit Screen GP Near Centerline OF Machine Between Rops Mounting PADS) : (ON Oil Fill Pipe ON RH Side OF Engine COMPARTMENT) : (ON RH Butterfly Plate EDGE, AT Center Line OF Engine End Frame Align Film With Valve GP-LUB) : (ON LH Butterfly Plate EDGE, AT Center Line OF Engine End Frame Align Film With Valve GP-LUB) : (ON Lower Front RH Side OF Engine End Frame Butterfly PLATE, Next TO Drive Shaft BORE) : (ON Service Center Fill Port Panel ON RH Side OF Engine End FRAME) : (ON RH Side OF Non Engine End Frame Next TO The Backside OF The Ovular Cutout Outside The Grease INJECTORS) : (ON LH Side OF Non Engine End Frame Next TO The Backside OF The Ovular Cutout Outside The Grease INJECTORS) : (ON Hitch Side OF Non Engine End Frame Above RH Side Grease INJECTORS) : (ON Hitch Side OF Non Engine End Frame Above LH Side Grease INJECTORS) : (2 - ON Front Chassis - ON Outside Surface Above A-PINS) : (2 - ON Rear Chassis - Next TO TIE-DOWN Eyes Above Rear Axle OPENING) : (2 - ON Front Chassis - Below The TIE-DOWN Eyes ON The FRAME) : (1 - ON Filler Tube For The Hydraulic Tank - Just Below Filler CAP, Facing REARWARD) : (1 - ON The Brake & Steering Tank - ON Top OF The Tank Next TO The Filler CAP) : (1 - ON The Brake Cooling Tank - ON Top OF The Tank Next TO The Filler CAP) : (1 - ON The RH Side OF The MACHINE, ON The Service Center Cover AS. : IN The Upper Front Corner Above The Most Forward LATCH) : (ON Service Center Fill Port Panel ON RH Side OF Non Engine End FRAME) : (ON Rear Chassis - Next TO Lower Rear Lifting EYES, ON Both SIDES) : (ON PT Oil Filler TUBE, Align Minimum Marking Film TO Lower Grove OF Filler TUBE) : (ON PT Oil Filler TUBE, Align Middle OF Crosshatch OF Film TO Middle Groves OF Filler TUBE) : (INSIDE Cab ON Left Post Below Pull HANDLE. The Films Should BE Alligned Vertically IN The Following Order From Top TO : BOTTOM: Universal WARNING, Seatbelt WARNING, Product Link WARNING, Downgrade Speed WARNING) : (INSIDE Cab ON Left Post Below Pull HANDLE. The Films Should BE Alligned Vertically IN The Following Order From Top TO : BOTTOM: Universal WARNING, Seatbelt WARNING, Product Link WARNING, Downgrade Speed WARNING) : (INSIDE Cab ON Left Post Below Pull HANDLE. The Films Should BE Alligned Vertically IN The Following Order From Top TO : BOTTOM: Universal WARNING, Seatbelt WARNING, Product Link WARNING, Downgrade Speed WARNING) : (INSIDE Cab ON Left Post Below Pull HANDLE. The Films Should BE Alligned Vertically IN The Following Order From Top TO : BOTTOM: Universal WARNING, Seatbelt WARNING, Product Link WARNING, Downgrade Speed WARNING) : (NEXT TO Each Fill Cap ON Top OF The RADIATOR) : (ON Each Side OF The Machine ON The Top OF The Most Rearward Engine Valve COVER) : (ON Forward Facing Front Frame Plate Below The Front Axle Drive SHAFT, Centered Between The Two Sets OF Parking Brake : Forcing HOLES) : (AT Eye Level Near Articulation LOCK) : (ON Both Sides OF The Front Frame AT Eye Level Height AT Articulated SWITCH) : (2 - ON Front Chassis - ON Lift Cylinder Rod Ends Next TO Pin BORES) : (2 - ON Upper Front Chassis - Next TO G-PIN BORES) : (2 - ON Front Chassis - Above The Ovular Injector Access Holes IN The Outer Plates OF The Front FRAME) : (2 - ON Front Chassis - Above The Tie Down Eyes ON The FRAME) : (2 - ON Rear Chassis - Above The Tie Down Eyes Above Rear Axle OPENING) : (100-MM Forward & 950-MM UP From Bottom Rear OF LH Non Engine End FRAME) : (ATTACH Tag TO Control GP-XMSN-(K))

*Assembly 346-5804 Plate & Film GP Suitable for 994H Wheel Loader Service Equipment And Supplies
*Original 346-5804 Assembly contains Regular Invoice included, After-sales service is provided by the official.
*Used 346-5804 Assembly offer Customs Invoice, After-sales service is provided.
*All Taxes included, no more extra fee.
*Shipping country: Asia China SZ / US(depends on local tax rate,effectiveness/tax rate will be prioritized).

Power-Cat.COM have professional services.

Power-Cat.COM global.